KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original
Ground improvement material

GIM ground improvement materials

GIM ground improvement material is a carbon-based product from KALOT Group for high-resistivity and highly corrosive soils and environments. Its resistivity is below 0.5 Ω·m and its polarisation resistance is above 8 Ω·m², a figure that matters for corrosive environments in the IEC 62561-7 corrosion test. GIM ground improvement material contains less than 1.2% sulphur and has a pH above 10; it is not washed away by surface water or groundwater, and its resistance stays stable without periodic topping up with water and salt. Use this earth pit backfill in horizontal trenches, around earth conductors and earth rods, or around copper plates. It is supplied in 15 kg bags, and you can work out the quantity you need with the GIM quantity calculator. Mix each bag with 2 kg of Portland cement and 8 litres of water to prepare the GIM mortar. Once placed, the mortar hardens, bonds to the conductor and is not washed away by surface water, which is why some call it "conductive cement". In rocky ground where driving an earth rod is difficult, simply dig a trench, lay the conductor in it and pour GIM mortar over it; this solves the problem of installing earth conductors in such areas. GIM is also very well suited to high-resistivity, mountainous, sandy and dry ground, and to sites where other ground improvement materials risk being washed out.

IEC 62561-7

Key capabilities of GIM®

Where the soil at an earthing site is corrosive, the material around the electrode matters far more than the initially measured earth resistance. KALOT Group's carbon-based GIM is made for exactly these projects.

Technical Specifications and Details

GIM | Ground Improvement Material

GIM ground improvement material from KALOT Group, with more than 20 years of history, is the first carbon-based ground improvement material in Iran, and when it entered the market it replaced traditional methods such as salt, charcoal and clay. GIM has a resistivity below 0.5 Ω·m and a polarisation resistance above 8 Ω·m², a figure that matters in the IEC 62561-7 corrosion test for corrosive soils and makes GIM suitable for industrial, power plant and oil and gas projects.

GIM has less than 1.2 percent sulphur and a pH above 10, is not washed out by surface water or groundwater, absorbs moisture and adheres to the earth conductor, which is why it works without periodic injection of water and salt.

Comparison of the polarisation resistance (PR) of GIM® products for corrosive and non-corrosive environments, based on the standards set for the KALOT ground improvement material range

Compliance with standards

We produce GIM to IEC 62561-7 and IGS-I-EL-001. To give our customers more assurance, at our request laboratories take GIM test samples from our warehouse without notice. The test reports, including those of the Razi Metallurgy laboratory and leading Iranian universities, are in the documents section of this page.

Use GIM in a horizontal trench, around the earth rod or around the copper plate. Find the number of bags you need with the GIM consumption calculator.

Comparison of ®GIM, GIM LIGHT, and ®ECO GIM ground improvement materials per IEC 62561-7 and IGS-I-EL-001

Documents & Downloads

Certificates & test reports

  • Carbon percentage test report for GIM ground improvement material | Tarbiat Modares University 2023English · 2023
  • IEC 62561-7 conformity test report for GIM ground improvement material | Razi Metallurgical Research Centre 2013Persian · 2013
  • IEC 62561-7 conformity test report for GIM ground improvement material | Tarbiat Modares University 2016Multilingual · 2016
  • IEC 62561-7 conformity test report for GIM ground improvement material | Tarbiat Modares University 2018Multilingual · 2018
  • Leaching test report for GIM ground improvement material | Tarbiat Modares University 2017English · 2017
  • pH and solubility test report for GIM ground improvement material | Amirkabir University of Technology 2011Persian · 2011
  • Soil Resistivity Test Report (GIM)

Expert Earthing System Consultation

Don't leave product selection and quantity to guesswork

Send us your project details so KALOT's engineers can review the right product, installation method, and consumption.

Calculate consumption for this product

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.