KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original

Earthing & Bonding Products

An earthing system creates a low-impedance path to earth for fault current and lightning current and, together with bonding, limits dangerous potential differences between metal enclosures, equipment and earth. Its performance does not depend on the electrode alone; the quality of the connections, the continuity of the conductors and the ability to inspect and measure throughout the life of the installation matter just as much. On this page, KALOT earthing and bonding equipment is grouped into six families so you can find the right group first and then review the photos, specifications and technical documents of each product on its own page.

Earth electrodes and earth rods: the material and electrical conductivity of an earth electrode have little effect on the final resistance achieved by the earthing system, and the choice of different electrode materials and shapes is usually driven by soil conditions, driving depth and, above all, corrosion. Copper-bonded earth rods with a steel core are used for deep driving, section by section with couplings; solid copper earth rods are a common choice in corrosive soils, and stainless steel earth rods where dissimilar metals are buried close together or where soil corrosion at the site calls for them. Earth pipes and copper plates are for designs where there is usually no room for a more extensive, standard earthing system and an electrode other than an earth rod is needed.

Clamps and connectors: every connection in an earthing system must be mechanically secure, electrically continuous and compatible with the conductor and electrode materials. We make KALOT earthing clamps for connecting conductors and tapes to earth rods, plates and metal structures, and for conductor-to-conductor connections.

Earth bars and bonding: The earth bar is the common point where earthing conductors come together, and its disconnect link allows the electrodes to be separated from the system temporarily while earth resistance is measured. Bonding products connect foundation reinforcing bars, structures and metal equipment to the earthing system, and the inspection pit keeps the connection point accessible for inspection and measurement.

Standards such as IEC 60364-5-54 (earthing arrangements and protective conductors in electrical installations), IEC 62305-3 (protection of structures against lightning), the IEC 62561 series (lightning protection system components, including connection components, conductors and earth electrodes) and BS EN 7430 are the references designers and contractors use when designing and installing this equipment.

Choose the section you need from the six groups below. If you are unsure between several models or connection types, tell our specialists the conductor material and size, the electrode type, the connection point and the project drawing when you enquire, so they can review the choice based on your project's details and help you select the right product.

Installing a copper-bonded earth rod in soil

Drag to rotate; scroll to zoom.Open full screen