KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original
Ground Improving Material - GIM

GIM Light ground improvement material

GIM Light is KALOT Group's carbon-based ground improvement material for ordinary, non-corrosive soils. Its density, carbon base and installation method are exactly the same as GIM. Its resistivity is below 1 ohm-metre (Tarbiat Modares University test: 0.77) and its polarisation resistance is above 7.5 ohm-square metres (test: 7.61). For buildings and for industrial and infrastructure projects in non-corrosive soil, GIM Light is installed in a horizontal trench, around an earth rod or around a copper plate. If the soil on site is corrosive, choose GIM. Like GIM, GIM Light is mixed with 2 kg of Portland cement and 8 litres of water per bag. Once placed, the mortar hardens, adheres to the conductor and is not washed away by surface water, which is why some people also call it "conductive cement". On rocky sites where driving an earth rod is difficult, you simply dig a trench, lay the conductor in it and pour the GIM Light mortar over it. GIM Light also suits land with high resistivity, mountainous, sandy and dry sites, and places where ground improvement material might otherwise be washed out.

IEC 62561-7 and IGS-I-EL-001

GIM Light: a conductive carbon bed for earthing systems

GIM Light is the carbon-based member of the KALOT family of ground improvement materials, introduced for earthing systems in soil with high resistivity and lower corrosivity. Once prepared, the material is installed around the earth conductor or electrode to increase and improve its electrical contact with the soil. In recent tests on this product, the tested sample showed a resistivity of 0.77 ohm-metre and a polarisation resistance of 7.61 Ω·m². It can be used in a horizontal trench, beside an earth rod or in an earth pit, and the 15 kg packaging makes it easier to choose the installation method and estimate the quantity needed. The final resistance of the earthing system depends on the soil conditions, the electrode design and the quality of installation.

  • Carbon base, suitable for soils with high and normal resistivity
  • Very high conductivity: material resistivity below 1 ohm-metre
  • Can be installed in a trench, with an earth rod or in an earth pit
  • Supplied in 15 kg composite bags

Technical Specifications and Details

GIM ground improvement material | Ground Improving Material

When choosing a ground improvement material, low material resistivity matters, but to understand how the material behaves next to the electrode you also need to look at polarisation resistance. GIM Light, with its carbon base, was introduced for ground with high and normal resistivity without severe corrosion conditions. In the test results for a sample of this product, resistivity of 0.77 ohm-metre and polarisation resistance of 7.61 Ω·m² were reported.

The chart below compares the polarisation resistance of GIM Light with the test results of ECO GIM and GIM. The comparison helps show where each product stands, but it does not show the final resistance of the earth pit or earthing grid. That value depends on the soil, the electrode layout and the quality of installation, and must be measured after installation. For highly corrosive environments, see our classic GIM product.

Comparison of the polarisation resistance index of the GIM family products in two types of environment


This chart compares the polarisation resistance of the material, not the final resistance of the earthing system.

Documents & Downloads

Certificates & test reports

  • GIM LIGHT certificate of conformity with IEC 62561-7, ground improvement materials, 1402Persian

Expert Earthing System Consultation

Don't leave product selection and quantity to guesswork

Send us your project details so KALOT's engineers can review the right product, installation method, and consumption.

Calculate consumption for this product

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.