Move your pointer over the image to zoom in
ECO GIM ground improvement material
Clay-base, cost-effective earth-resistance-reducing material, compliant with IEC 62561-7 and IGS-I-EL-001.
ECO GIM: a clay-based mineral blend for earthing systems
We produce KALOT ECO GIM ground improvement material from a formulation of several minerals on a clay base. "Clay-based" describes the type of formulation: ECO GIM is not plain clay or pure bentonite. Once correctly installed around the electrode, the material improves its electrical contact with the soil and helps lower the resistance of the earthing system. The declared material resistivity is below 1 ohm-metre, and the test results to IEC 62561-7 and IGS-I-EL-001 are given in the relevant certificates. ECO GIM is designed for projects in normal site conditions, where both verifiable technical quality and a proportionate cost matter.
- Multi-mineral, clay-based formulation
- Material resistivity below one ohm-metre
- Evaluated to IEC 62561-7 and IGS-I-EL-001
- Suitable for normal site conditions
Clay-based mineral formulation
ECO GIM is an engineered blend of several minerals on a clay base. That tells you what the product really is: ECO GIM is formulated for use in earthing systems and should not be confused with plain clay or pure bentonite.
- Blend of several minerals
- Clay base (Clay Base)
- Formulated for earthing applications
Better contact between electrode and soil
This material is placed around the earth electrode to improve its electrical contact with the surrounding soil. A resistivity below one ohm-metre is one of the technical properties of ECO GIM you can check when choosing a ground improvement material.
- Material resistivity: below one ohm-metre
- Used around the earth electrode
- Helps lower the resistance of the earthing system
Tested technical performance
Our new GIM series catalogue and test reports present the ECO GIM test results alongside the requirements of IEC 62561-7 and IGS-I-EL-001. Resistivity, polarisation resistance and related test results give designers and buyers a clearer technical basis for judging product quality.
- Resistivity test results
- Polarisation resistance evaluation
- Comparison with the requirements of the relevant standards
Quality at an economical price
ECO GIM is a reputable clay-based (Clay Base) ground improvement material at an economical price, and we offer it in the KALOT range for earthing applications. Like the other products in the GIM brand, ECO GIM is manufactured in line with the national and international standards IEC 62561-7 and IGS-I-EL-001.
With its economical price and high quality, this product can be a good alternative to traditional methods such as bentonite, clay, salt and charcoal. It is a cost-effective option for projects where quality matters but keeping costs under control matters too.
- Suitable for normal, non-corrosive conditions
- Installation methods: earth pit, earth rod and earth trench
- 15 kg bags.
Technical Specifications and Details
ECO GIM ground improvement material: a clay-based mineral blend for earthing systems
ECO GIM belongs to the KALOT family of ground improvement materials. It is made from a blend of several minerals on a clay base, so "Clay Base" names the type of formulation and does not mean plain clay or pure bentonite. ECO GIM is used to improve the electrical contact between the electrode and the surrounding soil and to help lower the resistance of the earthing system in normal site conditions.
How does ECO GIM help an earthing system perform?
Ground improvement materials sit around the buried electrode or conductor and fill part of the space between it and the surrounding soil. The declared resistivity of the ECO GIM material itself is below 1 ohm-metre. This figure is one way of evaluating the product; the final resistance of the earthing system must be measured on site after design and installation.
Tested properties and conditions of use
In our new GIM series catalogue, the ECO GIM results are reviewed against IEC 62561-7 and IGS-I-EL-001. The catalogue declares its polarisation resistance as above 7.2 Ω·m² and presents the product for normal, non-corrosive site conditions. When choosing a material for highly corrosive soils, the product properties and the actual project conditions should be reviewed separately.
Installation method and packaging
ECO GIM comes in 15 kg bags and, following the installation instructions, can be used in the common earth pit, earth rod and earth trench methods. The catalogue shows each bag mixed with 8 litres of water to make the mortar. The quantity to use and the electrode layout should be set from the earthing system design and the soil condition.
| Feature | Value |
|---|---|
| Material type | Multi-mineral blend on a clay base (Clay Base) |
| Material resistivity | Below one ohm-metre |
| Polarisation resistance | Above 7.2 Ω·m² |
| Operating conditions | Normal, non-corrosive environments |
| Weight per bag | 15 kg |
| Basis of evaluation | IEC 62561-7 and IGS-I-EL-001 |

Earth pit

Earth rod

Earth trench
Feature | Value |
|---|---|
Material base | Clay (Clay Base) |
Position of the product in Iran | Economical option: a solution for everyday projects in normal site conditions that still meets the technical requirements |
Polarisation resistance | Above 7.2 Ω·m²; Tarbiat Modares University test result: 7.41 Ω·m² |
Conditions of use | Suitable for normal, non-corrosive environments: general building, industrial and infrastructure projects |
Standards and sampling | IEC 62561-7 and IGS-I-EL-001; samples evaluated in reputable laboratories |
Material resistivity | Below 1 ohm-metre; Tarbiat Modares University test result: 0.85 ohm-metre |
pH and effect on the earth conductor | Non-corrosive to the earth conductor |
Solubility in acidic environments | Resists dissolving in acidic environments |
Sulphur content | Below 1.9%; Tarbiat Modares University test result: 1.9% (standard limit: 2%) |
Environmental documents | Leaching test result to the standard available |
Laboratory certificates | Certificates for resistivity, polarisation resistance, sulphur content and leaching test; Tarbiat Modares University, Faculty of Engineering |
Resistance to washout | Resists dissolving in water |
Moisture behaviour | High moisture absorption |
Adhesion to the earth conductor | Adheres permanently to the earth conductor |
Performance durability | Electrical resistance stays stable over time; very long service life |
Ease of installation | Simple to install and compatible with common installation methods; saves installation time |
Bag dimensions | About 10 × 40 × 60 cm |
Material density | About 750 kg per cubic metre |
Weight per bag | 15 kg |
Bag material | Composite |
Documents & Downloads
Catalogues & datasheets
Certificates & test reports
- Resistivity test report for ECO GIM ground improvement material | Tarbiat Modares University 2020-09-26English · 2020-09-26
- Resistivity test report for ECO GIM ground improvement material | Tarbiat Modares University 2020-09-02English · 2020-09-02
Similar & Complementary Products
Expert Earthing System Consultation
Don't leave product selection and quantity to guesswork
Send us your project details so KALOT's engineers can review the right product, installation method, and consumption.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.


