Move your pointer over the image to zoom in
Complete Product Overview
Earth rod connecting dowel (stainless steel and brass)
Order Code: CDS 1620 · CDS 2500 — CDB 1620 · CDB 2500
Last updated:
The KALOT dowel is a short threaded part that joins two copper or stainless steel earth rods through the internal thread at their ends. Half its length screws into each one, and the outer surface of the electrode stays smooth and even.
We manufacture the dowel in two materials, stainless steel (CDS) and brass (CDB): for 16 and 20 mm earth rods with an M10 thread and 40 mm length, and for 25 mm with an M12 thread and 50 mm length.
Hidden joint, even electrode
The dowel sits inside copper and stainless steel earth rods; nothing protrudes from the electrode surface, and driving them after joining is smoother.
Stainless steel or brass
CDS for stainless steel and copper earth rods; CDB for copper earth rods.
Full-length thread
Half the dowel length sits in each earth rod for a firm, conductive joint.
Two sizes for three diameters
M10 × 40 for 16 and 20 earth rods; M12 × 50 for 25 mm.
Even electrode surface
Nothing protrudes from the earth rod, so the soil makes good contact with the electrode.
Technical Product Information
Feature | Value |
|---|---|
Product type | Dowel for joining solid earth rods (copper and stainless steel) |
Material | Stainless steel (CDS), brass (CDB) |
Thread and length | M10 × 40 mm for 16 and 20 earth rods; M12 × 50 mm for 25 |
Installation | Half the length in the internal thread of each earth rod |
Our products are continually improved and some specifications may be updated, so please confirm the final specifications with our specialists before buying.
Order code | Earth rod diameter (mm) | Material | Thread | Length L (mm) |
|---|---|---|---|---|
CDS 1620 | 16 / 20 | Stainless steel | M10 | 40 |
CDS 2500 | 25 | Stainless steel | M12 | 50 |
CDB 1620 | 16 / 20 | Brass | M10 | 40 |
CDB 2500 | 25 | Brass | M12 | 50 |
For a stainless steel earth rod choose a stainless steel dowel, and for a copper earth rod a brass or stainless steel dowel; one dowel is needed for each joint.
Click to view enlarged
The KALOT dimensional drawing shows the threaded CDB brass and CDS stainless steel dowels with dimension L and thread M, along with details of how the dowel sits in the internal thread of two solid copper or stainless steel earth rods.
Click to view enlarged
Application
- Joining solid copper and stainless steel earth rods to increase electrode depth.
Installing the dowel
- Screw the dowel up to half its length into the internal thread at the upper end of the driven earth rod.
- Screw the next earth rod onto the other half of the dowel until the two facing ends meet.
- Fit the driving head into the upper end of the new earth rod and carry on driving.
Other components: copper earth rod, stainless steel earth rod, DH steel driving head and DS steel tip.
Technical notes
- The two ends of the earth rods must meet fully; the blow then passes from one to the other and the dowel carries no impact load.
- The dowel is not for threaded copper-bonded earth rods; use a brass coupling for those.
The following standards set out the requirements for earth electrodes and their components:
IEC 62561-2 (earthing system components)
This standard sets the requirements and tests for earth electrodes and their connecting components: coating thickness and adhesion, tensile and bending strength, electrical resistance, and corrosion behaviour (salt mist and humidity).
IEC 62305-3 and IEC 60364-5-54
The earthing system and its electrodes are designed for lightning protection and the protective earthing of installations based on these standards; they give the materials and minimum dimensions of the electrodes.
BS 7430
This is the common guide for calculating the resistance of the various types of earth electrode (earth rod, plate, conductor). How is earth termination resistance calculated?.
Installing a solid copper earth rod by driving into soil
Frequently Asked Questions
What is an earth rod dowel?
A short threaded part that joins two copper or stainless steel earth rods through the internal thread at their ends.
Is a stainless steel or a brass dowel better?
For a stainless steel earth rod, a stainless steel dowel; for a copper earth rod, either material is suitable.
What size should I order?
For 16 and 20 mm earth rods, an M10 dowel 40 mm long (CDS/CDB 1620); for 25 mm, an M12 dowel 50 mm long (CDS/CDB 2500).
Is a dowel also used for copper-bonded earth rods?
No. A copper-bonded earth rod has an external thread and joins with a brass coupling.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



