Move your pointer over the image to zoom in
Complete Product Overview
Steel driving head for copper and stainless steel earth rods
Order Code: DH 16 · DH 20 · DH 25
Last updated:
The KALOT driving head is a steel bolt with a wide, knurled head. It screws into the internal thread at the upper end of a copper or stainless steel earth rod and protects the thread and end during driving.
We manufacture this part for 16 and 20 mm earth rods with an M10 thread (DH 16, DH 20) and 25 mm earth rods with an M12 thread (DH 25); it is unscrewed after driving and used again.
A sound thread for the next joint
The internal thread of solid copper and stainless steel earth rods is where the dowel fits; the driving head keeps this thread and the rim around it from being damaged under impact.
Impact-resistant steel
For hand and electric hammers.
Protects the internal thread
The wide head spreads the blow over the rim of the earth rod and the thread stays intact.
Reusable
Unscrewed after each earth rod is driven.
For three diameters
DH 16 and DH 20 with M10; DH 25 with M12.
Technical Product Information
Feature | Value |
|---|---|
Product type | Driving head (stud) for copper and stainless steel earth rods |
Material | Steel |
Thread | M10 for 16 and 20 earth rods; M12 for 25 mm |
Installation | Screwed into the internal thread at the upper end of the earth rod |
Our products are continually improved and some specifications may be updated, so please confirm the final specifications with our specialists before buying.
Order code | Earth rod diameter (mm) | Thread |
|---|---|---|
DH 16 | 16 | M10 |
DH 20 | 20 | M10 |
DH 25 | 25 | M12 |
One driving head is enough for each earth rod diameter.
Click to view enlarged
The KALOT drawing shows the steel driving head (bolt with a knurled head) and how it screws into the internal thread at the end of a solid copper or stainless steel earth rod, with a top view and a code table.
Click to view enlarged
Application
- Driving solid copper and stainless steel earth rods with a hand or electric hammer.
How to drive an earth rod
- Mark the earth rod location according to the earthing drawing and a safe distance from foundations and underground services.
- In hard or rocky soil, fit the DS steel tip into the internal thread at the lower end of the earth rod.
- Fit the DH driving head into the internal thread at the upper end of the earth rod.
- Hold the earth rod upright and drive it with even blows using a hand or electric hammer.
- For greater depth, unscrew the driving head, screw the dowel halfway into the thread of the driven earth rod, screw the next earth rod onto it and drive again.
- Once at design depth, remove the driving head, connect the earth conductor to the top of the electrode with an earth rod clamp or exothermic welding, and measure the earth resistance.
Other components: copper earth rod, stainless steel earth rod, earth rod connecting dowel and DS steel tip.
The following standards set out the requirements for earth electrodes and their components:
IEC 62561-2 (earthing system components)
This standard sets the requirements and tests for earth electrodes and their connecting components: coating thickness and adhesion, tensile and bending strength, electrical resistance, and corrosion behaviour (salt mist and humidity).
IEC 62305-3 and IEC 60364-5-54
The earthing system and its electrodes are designed for lightning protection and the protective earthing of installations based on these standards; they give the materials and minimum dimensions of the electrodes.
BS 7430
This is the common guide for calculating the resistance of the various types of earth electrode (earth rod, plate, conductor). How is earth termination resistance calculated?.
Installing a solid copper earth rod by driving into soil
Frequently Asked Questions
Which earth rod is the DH driving head for?
For solid copper and stainless steel earth rods with an internal thread.
What is the driving head made of?
Steel, to withstand repeated blows.
Does it stay in the ground?
No. It is unscrewed after driving and used for the next earth rod.
Which model should I choose?
DH 16 for 16 mm earth rods, DH 20 for 20 mm and DH 25 for 25 mm.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



