Move your pointer over the image to zoom in
Complete Product Overview
Steel tip for copper and stainless steel earth rods
Order Code: DS 16 · DS 20 · DS 25
Last updated:
The KALOT steel tip fastens by its threaded screw into the internal thread at the lower end of a copper or stainless steel earth rod, and makes driving the earth rod into the soil easier.
We make this tip from high-strength steel for 16 and 20 mm earth rods with an M10 thread (DS 16, DS 20) and for 25 mm earth rods with an M12 thread (DS 25).
A clear path for the solid earth rod
The lower end of solid copper and stainless steel earth rods is flat. Our conical steel tip opens a way through the soil and takes the earth rod straight down to depth.
High-strength steel
It keeps its shape in hard, stony soil.
Protects the earth rod end
The edge and internal thread at the lower end of the earth rod stay undamaged.
Simple fastening
The tip's screw fastens into the internal thread of the earth rod.
For three diameters
DS 16 and DS 20 with M10; DS 25 with M12.
Technical Product Information
Feature | Value |
|---|---|
Product type | Driving tip (spike) for copper and stainless steel earth rods |
Material | High-strength steel |
Thread | M10 for 16 and 20 earth rods; M12 for 25 mm |
Installation | Fastens into the internal thread at the lower end of the earth rod |
Our products are continually improved and some specifications may be updated, so please confirm the final specifications with our specialists before buying.
Order code | Earth rod diameter (mm) | Thread |
|---|---|---|
DS 16 | 16 | M10 |
DS 20 | 20 | M10 |
DS 25 | 25 | M12 |
Each electrode needs only one tip, on the lower end of the first earth rod.
Click to view enlarged
Our KALOT drawing shows the conical steel tip with its threaded screw and how it fastens into the lower end of a solid earth rod, together with a top view and the code table.
Click to view enlarged
Application
- Driving solid copper and stainless steel earth rods, particularly in hard, stony soil.
How to install and drive
- Mark the earth rod location according to the earthing drawing and a safe distance from foundations and underground services.
- In hard or rocky soil, fit the DS steel tip into the internal thread at the lower end of the earth rod.
- Fit the DH driving head into the internal thread at the upper end of the earth rod.
- Hold the earth rod upright and drive it with even blows using a hand or electric hammer.
- For greater depth, unscrew the driving head, screw the dowel halfway into the thread of the driven earth rod, screw the next earth rod onto it and drive again.
- Once you reach the design depth, remove the driving head, connect the earth conductor to the top of the earth rod with a clamp or exothermic welding, and measure the resistance of the earth termination.
Other parts: copper earth rod, stainless steel earth rod, earth rod connecting dowel and DH steel driving head.
The following standards set out the requirements for earth electrodes and their components:
IEC 62561-2 (earthing system components)
This standard sets the requirements and tests for earth electrodes and their connecting components: coating thickness and adhesion, tensile and bending strength, electrical resistance, and corrosion behaviour (salt mist and humidity).
IEC 62305-3 and IEC 60364-5-54
The earthing system and its electrodes are designed for lightning protection and the protective earthing of installations based on these standards; they give the materials and minimum dimensions of the electrodes.
BS 7430
This is the common guide for calculating the resistance of the various types of earth electrode (earth rod, plate, conductor). How is earth termination resistance calculated?.
Installing a solid copper earth rod by driving into soil
Frequently Asked Questions
Which earth rod is the DS steel tip for?
For solid copper and stainless steel earth rods with an internal thread.
Does the tip stay in the soil?
Yes. It fastens to the lower end of the earth rod and stays in the soil with it.
What is the tip made of?
High-strength steel.
Which model should I choose?
DS 16 is for an earth rod 16 mm in diameter, DS 20 for 20 mm and DS 25 for 25 mm.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



