Move your pointer over the image to zoom in
Complete Product Overview
Three-pronged tip for conventional air rods
Order Code: MP 016 · MP 020
Last updated:
The KALOT three-pronged tip for conventional air rods fits on the tip of a conventional (Franklin) air rod. Beside the air rod's own tip, it places three pointed copper prongs in three directions at 120 degrees, turning the air terminal tip into a multi-point one.
The body of the three-pronged tip is brass and the prongs are copper. The air rod tip passes through the centre hole of the body, and the prongs fix into the body by their threaded ends.
We offer two models: MP 016 for 16 mm diameter air rods and MP 020 for 20 mm diameter. This three-pronged tip is made for use with KALOT pointed copper air rods.
A multi-point tip for the conventional air rod
The three-pronged tip is added to the tip of a conventional air rod and gives several sharp points in different directions at the highest point of the air terminal. The position, height and number of air rods still come from the lightning protection system design, and the three-pronged tip simply fits on them.
Three prongs at 120 degrees
Three pointed copper prongs sit on the body in three directions at equal angles, while the air rod's own tip stays at the centre.
Brass body, copper prongs
The body is brass and the prongs are copper, which works well with the copper air rod and the system's copper and brass connectors.
Fits on the tip of the air rod
The air rod tip passes through the centre hole of the body, and the prongs screw into the side holes of the body by their threaded ends.
Two models for two air rod diameters
MP 016 for the 16 mm air rod and MP 020 for the 20 mm type; height H = 156 mm and width W = 72 mm.
Technical Product Information
Feature | Value |
|---|---|
Product type | Three-pronged air rod tip (Multi-Point Head) |
Body material | Brass |
Prong material | Copper |
Structure | Body with a centre hole for the air rod tip and three pointed prongs with threaded ends at 120 degrees |
Suitable air rod | Pointed copper air rod, 16 mm or 20 mm in diameter |
Dimensions | H = 156 mm, W = 72 mm |
Order code | MP 016 , MP 020 |
Order code | Air rod diameter (mm) | H (mm) | W (mm) | Material |
|---|---|---|---|---|
MP 016 | 16 | 156 | 72 | Brass body, copper prongs |
MP 020 | 20 | 156 | 72 | Brass body, copper prongs |
Choose the model by the diameter of the air rod. The positions of H and W in the "Technical drawing and dimensions" tab are shown just as on the KALOT catalogue drawing. Order the three-pronged tip and the air rod together so that its tip is prepared for fitting.
Click to view enlarged
The KALOT drawing shows a side view of the three-pronged tip with height H, a top view with the three prongs at 120 degrees and width W, and one copper prong with its threaded end. This is not a manufacturing drawing. Its PDF and SVG files are in the "Documents and downloads" section of this page.
Click to view enlarged
Application
The three-pronged tip is used with conventional air rods in standard lightning protection systems, on air rods covering roofs, parapets, chimneys and tall structures. It is one part of the air terminal, and the system designer sets the position and height of the air rods using the protection angle, rolling sphere or mesh method.
Related components
- Suitable air rod for the three-pronged tip: conventional air rod in solid copper.
- Air rod base on a flat surface: air rod base for flat surfaces.
- All KALOT conventional (Franklin) air rod models: conventional air rods.
Installation sequence
- Choose the three-pronged tip model that matches the air rod diameter.
- Screw the copper prongs by their threaded ends into the side holes of the body.
- Place the three-pronged tip on the air rod tip so that the tip comes out through the centre hole of the body, and secure the three-pronged tip on it.
- Install the air rod on its base or coupling in the usual way and tighten it with the lock nut.
- After installation, check that the prongs are tight and that the three-pronged tip is secure on the air rod.
Technical notes
- The three-pronged tip fits on an air rod whose tip has been prepared for it, which is why we suggest ordering the conventional air rod and the three-pronged tip from us together.
- The protection zone of each passive air rod is set by its height and position in the system design. The three-pronged tip does not replace proper system design.
- The prongs and body are copper and brass, so use them with a copper air rod and copper or brass connectors.
Does the three-pronged tip enlarge the protection zone?
No. Under IEC 62305-3, the protection zone of each air terminal comes only from its height and position, using the rolling sphere or protection angle method, and the shape of the tip plays no part in this calculation. The rolling sphere radius for protection levels I to IV is 20, 30, 45 and 60 m respectively.
A seven-year field study published by Moore and colleagues in the Journal of Applied Meteorology (2000 and 2003) also showed that a sharper or multi-point tip does not make a strike more likely to be received. In that experiment, it was air rods with semi-rounded tips that were struck.
The three-pronged tip is a common, traditional design for air terminal tips. It is fitted on a conventional air rod when the project design or the client calls for a multi-point tip, and the protection zone still comes from the system design.
Inspection and maintenance
During periodic inspections of the lightning protection system, check that the prongs are tight in the body and the three-pronged tip is secure on the air rod, and look for bent prongs and corrosion. Inspect also after every known lightning event.
The standards below are listed to help you understand the requirements for air terminals and the place of the three-pronged tip in a lightning protection system.
System design standard: IEC 62305-3
This standard covers the design, installation, inspection and maintenance of a structure's lightning protection system. Air terminals are positioned by the protection angle, rolling sphere or mesh method, and the height and position of the air rods form the basis for calculating the protection zone.
Component standard: IEC 62561-2
This standard sets the requirements for conductors and electrodes of lightning protection systems, including the air rods in the air terminal. The conventional air rods that the three-pronged tip fits on are produced in line with its requirements.
Fitting a three-point tip to a conventional air rod
Similar & Complementary Products
Frequently Asked Questions
What is a three-pronged air rod tip?
A fitting with a brass body and three pointed copper prongs that is installed on the tip of a conventional air rod. The air rod's own tip stays at the centre, and the three prongs sit in three directions at 120 degrees.
Which air rod does it fit on?
On KALOT pointed copper air rods: MP 016 for the 16 mm type and MP 020 for the 20 mm type. Order the three-pronged tip and the air rod together so that its tip is prepared for fitting.
Does the three-pronged tip enlarge the protection zone?
No. Under IEC 62305-3, the protection zone comes only from the height and position of the air terminal, using the rolling sphere or protection angle method, and the shape of the tip plays no part. Field research has also shown that a multi-point or sharper tip does not make a strike more likely to be received. The three-pronged tip is a common design for air terminal tips and does not replace proper system design.
What is the three-pronged tip made of?
The body of the three-pronged tip is brass and the prongs are copper.
What are the dimensions of the three-pronged tip?
Both models have a height of H = 156 mm and a width of W = 72 mm. The position of each dimension is shown on the dimensional drawing.
How do the prongs fix to the body?
Each prong has a threaded end that screws into a side hole in the brass body.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



