Move your pointer over the image to zoom in
Complete Product Overview
Brass coupling for connecting conductor to air rod
Last updated:
Our brass coupling for connecting conductor to air rod joins a round conductor of 50, 70 or 95 mm² to the foot of a conventional air rod. The air rod screws into the threaded socket on top of the coupling, and the conductor is clamped with two side bolts. We use this coupling with the wall support for air rods installed on the facade. It comes in two threads, M16 and M20.
Brass coupling for connecting conductor to air rod
Our brass coupling for connecting conductor to air rod joins a round conductor of 50, 70 or 95 mm² to the foot of a conventional air rod. The air rod screws into the threaded socket on top of the coupling, and the conductor is clamped with two side bolts. We use this coupling with the wall support for air rods installed on the facade. It comes in two threads, M16 and M20.
- Connects round conductors of 50, 70 and 95
- Used with the wall support
- M16 and M20 threads
- Brass body
Direct conductor connection
The round conductor is clamped in the coupling with two side bolts.
Three conductor sizes
Separate codes for 50, 70 and 95 mm² conductors, each in two threads.
Used with the wall support
The coupling sits in the eye of the lower support.
Cast brass
Brass body that resists atmospheric corrosion and is compatible with copper conductors.
Technical Product Information
Click to view enlarged
Feature | Value |
|---|---|
Product type | Coupling for connecting a round conductor to an air rod |
Application | Wall-mounted conventional air rods, used with the wall support |
Connectable conductor | Round conductor of 50, 70 or 95 mm² |
Air rod connection thread | M16 or M20 |
Dimensions | L = 80 and D = 40 mm |
Material | Cast brass |
Codes | RTCC 1650 to RTCC 2095 |
Dimensions and codes
Code | Conductor (mm²) | Thread | L (mm) | D (mm) |
|---|---|---|---|---|
RTCC 1650 | 50 | M16 | 80 | 40 |
RTCC 1670 | 70 | M16 | 80 | 40 |
RTCC 1695 | 95 | M16 | 80 | 40 |
RTCC 2050 | 50 | M20 | 80 | 40 |
RTCC 2070 | 70 | M20 | 80 | 40 |
RTCC 2095 | 95 | M20 | 80 | 40 |
Our products are continually improved and some dimensions may be updated; please confirm the final dimensions with our specialists before you buy.
Click to view enlarged
Download the drawing: PDF · SVG (vector)
Click to view enlarged
Application
When an air rod is installed on a wall and the down conductor is round, the foot of the air rod sits in the lower wall support and this coupling connects the conductor to the air rod.
Installation steps
- Choose the coupling code to match the conductor cross-section (50, 70 or 95) and the air rod thread.
- Fix the wall supports on one vertical line on the facade and place the coupling in the eye of the lower support.
- Pass the air rod through the eye of the upper support and screw it into the coupling socket.
- Place the round conductor in the coupling and tighten the two side bolts.
Inspection and maintenance
During periodic inspections of the lightning protection system, check that the screws and locknut are tight, the air rod is vertical and the conductor connection is sound, and retighten where needed.
The standards below are the reference for designing and selecting lightning protection system components, and they show where this part sits in the system.
System design: IEC 62305-3
Design, installation and inspection of a structure's lightning protection system, including the position and height of air rods, the installation of roof conductors and down conductors, and how they connect to each other.
Connection components: IEC 62561-1
Requirements and tests for the metal connection components of a lightning protection system. Parts that join air rods and conductors fall into this group.
Air rods and conductors: IEC 62561-2
Material, dimension and test requirements for air rods, conductors and earth electrodes.
Brass wall support with wire coupling
Similar & Complementary Products
Frequently Asked Questions
Which conductor is this coupling for?
For round conductors with a cross-section of 50, 70 or 95 mm². For tape, use the coupling for connecting tape to air rod.
How do I choose the right code?
The first two digits of the code give the air rod thread and the last two give the conductor cross-section. For example, RTCC 2095 means an M20 thread for a 95 mm² conductor.
Which part is it used with?
With the brass wall support. The coupling sits in the eye of the lower support.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



