Move your pointer over the image to zoom in
Complete Product Overview
Brass air rod base for flat surfaces
Last updated:
Our brass air rod base for flat surfaces holds a conventional air rod on a flat roof and at the same time connects the roof tape conductor to it. Our one-piece cast body is fixed to the roof through four drilled arms, the air rod sits in the threaded socket at its centre and the tape passes under the body. It comes in two threads, M16 and M20, for 16 and 20 mm air rods.
Brass air rod base for flat surfaces
Our brass air rod base for flat surfaces holds a conventional air rod on a flat roof and at the same time connects the roof tape conductor to it. Our one-piece cast body is fixed to the roof through four drilled arms, the air rod sits in the threaded socket at its centre and the tape passes under the body. It comes in two threads, M16 and M20, for 16 and 20 mm air rods.
- For flat, level roofs
- Connects the tape conductor to the air rod
- M16 and M20 threads
- One-piece brass body
Holds the air rod and connects the conductor
A single part holds the conventional air rod on the roof and connects the roof tape conductor to it.
Through-run, three-way or four-way connection
The tape passes under the body, so the roof conductor can run in whichever direction the design calls for.
Four mounting arms
Four drilled arms hold the base firmly on the roof surface.
Cast brass
A one-piece brass body that resists atmospheric corrosion and is compatible with copper conductors and copper air rods.
Technical Product Information
Click to view enlarged
Feature | Value |
|---|---|
Product type | One-piece base for conventional air rods on flat surfaces |
Installation location | Flat, level roofs |
Connectable conductor | Tape: through-run, three-way or four-way |
Air rod connection thread | M16 or M20 |
Dimensions | L = 101 and H = 29 mm |
Material | Cast brass |
Codes | LDST 16 and LDST 20 |
Dimensions and codes
Code | Thread | L (mm) | H (mm) |
|---|---|---|---|
LDST 16 | M16 | 101 | 29 |
LDST 20 | M20 | 101 | 29 |
Our products are continually improved and some dimensions may be updated; please confirm the final dimensions with our specialists before you buy.
Click to view enlarged
Download the drawing: PDF · SVG (vector)
Click to view enlarged
Application
In conventional (Franklin) systems, passive air rods are spread across the roof and the roof conductor links them to each other and to the down conductors. This base is designed for flat, level roofs and connects the roof tape conductor directly to the air rod. The tape can pass under the body as a through-run, three-way or four-way connection.
Installation steps
- Mark the base positions on the roof according to the lightning protection system drawing.
- Place the base on the flat roof surface and fix it through the four arm holes, using screws and wall plugs that suit the roof material.
- Pass the roof conductor tape under the base body along the design route and secure it.
- Screw the air rod into the threaded socket and tighten it with the locknut.
Inspection and maintenance
During periodic inspections of the lightning protection system, check that the screws and locknut are tight, the air rod is vertical and the conductor connection is sound, and retighten where needed.
The standards below are the reference for designing and selecting lightning protection system components, and they show where this part sits in the system.
System design: IEC 62305-3
Design, installation and inspection of a structure's lightning protection system, including the position and height of air rods, the installation of roof conductors and down conductors, and how they connect to each other.
Connection components: IEC 62561-1
Requirements and tests for the metal connection components of a lightning protection system. Parts that join air rods and conductors fall into this group.
Air rods and conductors: IEC 62561-2
Material, dimension and test requirements for air rods, conductors and earth electrodes.
Brass air rod base for flat surfaces
Similar & Complementary Products
Frequently Asked Questions
Which roofs is this base for?
For flat, level roofs. For the ridge of a pitched roof, use the roof ridge base, and for the roof slope itself, use the adjustable stainless steel base.
Which conductor connects to this base?
The roof tape conductor. The tape passes under the body, which allows a through-run, three-way or four-way connection. For a round conductor, see the two-piece base for flat surfaces.
What size is the base thread?
LDST 16 has an M16 thread and LDST 20 an M20 thread, to suit conventional air rods of 16 and 20 mm diameter.
How is the base fixed to the roof?
Through the holes in its four arms, using screws and wall plugs that suit the roof material. On waterproof coverings, fit sealing washers under the screws.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



