Move your pointer over the image to zoom in
Complete Product Overview
Earth bar without insulators
Last updated:
The KALOT earth bar without insulators is a one-piece copper bar with two bent feet, fixed directly to the mounting surface. It also shares one earthing system output among several loads, except that with no insulators it is bonded to its mounting location. We make it in two versions, copper (EBWI) and tinned copper (ETWI), and in four lengths.
The bar and feet are one piece, made of copper (EBWI) or tinned copper (ETWI) with a 50 x 5 mm cross-section, in four lengths from 261 to 451 mm with 2 to 6 holes and M10 or M12 connection bolts. This earth bar is fixed directly to the surface and is bonded to it. It suits the inside of electrical panels, metal structures or cable trays and the inside of earth pits, meaning places where the bar must be at one with its mounting location.
One-piece bar with bent feet
Because this earth bar is fixed directly to the surface without insulators, it is bonded to that surface. It suits a structure or panel that must itself be connected to the earthing system.
- One-piece bar with bent feet
- Copper (EBWI) or tinned copper (ETWI)
- Bonded to the mounting location
- Four lengths, 2 to 6 holes
Bonded to the panel or structure
Suits the inside of electrical panels, metal structures or cable trays and the inside of earth pits: places where the bar must be at one with its mounting location.
Common point for earth conductors
The earth conductor, protective conductors and bonding conductors are each fixed to the bar's holes with their own cable lug.
Copper or tinned copper
Bare copper for dry environments and the inside of panels. The tinned version helps reduce oxidation and discolouration of the copper surface in damper or more corrosive environments.
8 standard codes
Codes EBWI 02 to ETWI 06. Other dimensions are made to order.
Made by KALOT Group
Designed and made to KALOT drawings and technical catalogue. The datasheet for each model is in the documents section.
Technical Product Information
Click to view enlarged
Feature | Value |
|---|---|
Type | Earth bar without insulators, with bent feet |
Material | Copper (EBWI) or tinned copper (ETWI) |
Bar cross-section | 50 x 5 mm |
Number of holes | 2, 4, 5 or 6 (according to code) |
Cable lug connection bolt | M10 or M12, to order |
Codes | EBWI 02 to EBWI 06 and ETWI 02 to ETWI 06 |
Codes and dimensions
Code | Material | Number of holes | L (mm) | W (mm) | H (mm) |
|---|---|---|---|---|---|
EBWI 02 | Copper | 2 | 261 | 50 | 50 |
EBWI 04 | Copper | 4 | 331 | 50 | 50 |
EBWI 05 | Copper | 5 | 401 | 50 | 50 |
EBWI 06 | Copper | 6 | 451 | 50 | 50 |
ETWI 02 | Tinned copper | 2 | 261 | 50 | 50 |
ETWI 04 | Tinned copper | 4 | 331 | 50 | 50 |
ETWI 05 | Tinned copper | 5 | 401 | 50 | 50 |
ETWI 06 | Tinned copper | 6 | 451 | 50 | 50 |
Dimensions are in millimetres. Our products are continually improved and some dimensions may be updated, so please confirm final dimensions with our specialists before you buy.
Click to view enlarged
Dimensional drawing of the earth bar without insulators, based on KALOT drawings and catalogue. The dimensions of each code are in the table below.
Code | Material | Number of holes | L (mm) | W (mm) | H (mm) |
|---|---|---|---|---|---|
EBWI 02 | Copper | 2 | 261 | 50 | 50 |
EBWI 04 | Copper | 4 | 331 | 50 | 50 |
EBWI 05 | Copper | 5 | 401 | 50 | 50 |
EBWI 06 | Copper | 6 | 451 | 50 | 50 |
ETWI 02 | Tinned copper | 2 | 261 | 50 | 50 |
ETWI 04 | Tinned copper | 4 | 331 | 50 | 50 |
ETWI 05 | Tinned copper | 5 | 401 | 50 | 50 |
ETWI 06 | Tinned copper | 6 | 451 | 50 | 50 |
Download: Datasheet (PDF) · Drawing PDF · Drawing SVG · Colour drawing PDF
Click to view enlarged
The earth bar in the earthing system
An earth bar is the common point where the earth conductor (from the electrode or earthing network), protective conductors and bonding conductors meet. Each conductor is fixed with a cable lug of matching size and a bolt and nut to one of the bar's holes, so the number of holes, and with it the earth bar length, depends on the number of inputs and outputs.
Because this earth bar is fixed directly to the surface without insulators, it is bonded to that surface. It suits a structure or panel that must itself be connected to the earthing system. If the earth bar must stay separate from the mounting surface, choose an earth bar on insulators. The tinned copper version (ETWI) helps reduce oxidation and discolouration of the copper surface in damper or more corrosive environments, while the copper version (EBWI) suits dry environments and the inside of panels.
Installation
Install the earth bar on a flat, solid surface, in a dry place accessible for inspection. For wall mounting, the KALOT catalogue recommends 1½ inch No. 12 countersunk wood screws with No. 12 wall plugs. Fix each conductor to the bar with a cable lug of matching size and tighten the bolts evenly. In open or busy locations, place the earth bar inside a protective enclosure.
Enquiries
When you enquire, tell us the number of inputs and outputs, the number of disconnect links, the cross-section of the conductors and the installation location, and our specialists will recommend the right code. Other dimensions and hole counts are also made to order.
IEC 60364-5-54 provides for a means of disconnecting the earth conductor from the main earthing terminal: a device in an accessible place that opens only with a tool and is used for measuring earth resistance. A disconnect link does exactly this. In lightning protection systems, IEC 62305-3 provides test joints for measuring earth resistance.
Three-dimensional view of an earth bar installation in a building
Documents & Downloads
Catalogues & datasheets
Drawings & schematics
Similar & Complementary Products
Frequently Asked Questions
What is the difference between an earth bar without insulators and one on insulators?
An earth bar without insulators is fixed directly to the surface and is bonded to it. An earth bar on insulators stays separate from the mounting surface.
What is an earth bar used for?
An earth bar is the common connection point for the earth conductor, protective conductors and bonding conductors, and it shares one earthing system output among several loads.
What is a disconnect link for?
To separate the earthing system from the loads during inspection and earth resistance measurement, without opening the connection of each individual load.
How do I choose the right code?
The number of inputs and outputs sets the number of holes you need, and the number of earthing systems to be measured separately sets the number of links.
Bare or tinned copper: which should I choose?
Bare copper is sufficient for dry environments and the inside of panels and electrical rooms. In damper or more corrosive environments, the tinned version helps reduce oxidation and discolouration of the copper surface.
Earth bar with or without insulators?
If the earth bar must be the single earthing connection point, be measured through a disconnect link or serve sensitive and telecoms equipment, choose the model on insulators so the bar stays separate from walls and structures. If the bar must be bonded to a panel or structure, the model without insulators is simpler and more suitable.
How does tinned copper differ from plain copper?
The tin layer means the copper surface oxidises and darkens less in damp or corrosive environments. Electrically, both versions are used in the same way.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



