KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original
Earth bars

Complete Product Overview

Earth bar with one disconnect link

Last updated:

The KALOT one-link earth bar shares one earthing system output among several loads, and its disconnect link lets you separate the earthing system from the earth bar during inspection and resistance measurement without opening the load connections. The bar is 50 x 5 mm copper, mounted on reinforced polyester insulators and a stainless steel base.

The bar is 50 x 5 mm copper (250 mm² cross-section), and we also make it in tinned copper to order. It sits on 2 to 4 reinforced polyester insulators and a stainless steel base. We offer six lengths: from 2 to 12 holes, codes EB 021L to EB 121L, with lengths of 243 to 593 mm. Cable lugs are fixed with M10 or M12 bolts in stainless steel or brass.

One disconnect link for measurement

The earthing system input conductor comes to the link, and the loads connect to the bar's holes with cable lugs.

  • One disconnect link for measurement
  • 50 x 5 copper bar; tinned to order
  • Reinforced polyester insulators
  • Six lengths, from 2 to 12 holes
  • Measurement without opening the cables

    Opening the link separates the earth electrode from the earth bar, so its resistance can be measured without disconnecting the load conductors.

  • Common point for earth conductors

    The earth conductor, protective conductors and bonding conductors are each fixed to the bar's holes with their own cable lug.

  • Copper or tinned copper

    Bare copper for dry environments and the inside of panels. The tinned version helps reduce oxidation and discolouration of the copper surface in damper or more corrosive environments.

  • 6 standard codes

    Codes EB 021L to EB 121L. Other dimensions are made to order.

  • Made by KALOT Group

    Designed and made to KALOT drawings and technical catalogue. The datasheet for each model is in the documents section.

Technical Product Information

Click to view enlarged

Feature

Value

Type

Earth bar with one disconnect link

Bar

50 x 5 mm copper; tinned copper to order

Base

Stainless steel

Insulator

Reinforced polyester; 2 to 4 depending on bar length

Bolts, nuts and washers

Stainless steel or brass

Number of holes

2, 4, 6, 8, 10 or 12 (according to code)

Cable lug connection bolt

M10 or M12, to order

Codes

EB 021L to EB 121L

Codes and dimensions

Code

Number of holes

⁦L (mm)⁩

⁦W (mm)⁩

⁦H (mm)⁩

⁦EB 021L⁩

⁦2⁩

⁦243⁩

⁦90⁩

⁦90⁩

⁦EB 041L⁩

⁦4⁩

⁦313⁩

⁦90⁩

⁦90⁩

⁦EB 061L⁩

⁦6⁩

⁦383⁩

⁦90⁩

⁦90⁩

⁦EB 081L⁩

⁦8⁩

⁦453⁩

⁦90⁩

⁦90⁩

⁦EB 101L⁩

⁦10⁩

⁦523⁩

⁦90⁩

⁦90⁩

⁦EB 121L⁩

⁦12⁩

⁦593⁩

⁦90⁩

⁦90⁩

Dimensions are in millimetres. Our products are continually improved and some dimensions may be updated, so please confirm final dimensions with our specialists before you buy.

Three-dimensional view of an earth bar installation in a building

See the main earth bar with its disconnecting link, the sub earth bars, the earth pit and the foundation earth, with an exploded view, installation steps, a single-line diagram and a parts list.Open full screen

Frequently Asked Questions

What is an earth bar used for?

An earth bar is the common connection point for the earth conductor, protective conductors and bonding conductors, and it shares one earthing system output among several loads.

What is a disconnect link for?

To separate the earthing system from the loads during inspection and earth resistance measurement, without opening the connection of each individual load.

How do I choose the right code?

The number of inputs and outputs sets the number of holes you need, and the number of earthing systems to be measured separately sets the number of links.

Bare or tinned copper: which should I choose?

Bare copper is sufficient for dry environments and the inside of panels and electrical rooms. In damper or more corrosive environments, the tinned version helps reduce oxidation and discolouration of the copper surface.

Why should a load not be connected to the link input?

Because opening the link also disconnects that load from the earthing system, and the measurement is not accurate either. The link input is only for the conductor coming from the electrode or earth pit.

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.