KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original
Earth bars

Complete Product Overview

Earth bar with two disconnect links

Last updated:

The KALOT two-link earth bar is for places where two separate earthing systems must come together on one earth bar and their output must be shared among several loads. Each earthing system connects to the bar through its own disconnect link, so during inspection and earth resistance measurement each can be taken out of circuit separately. The bar is 50 x 5 mm copper, on reinforced polyester insulators and a stainless steel base.

The bar is 50 x 5 mm copper (250 mm² cross-section), and we also make it in tinned copper to order. It is mounted on 2 to 4 reinforced polyester insulators and a stainless steel base, and stays separate from the wall or panel surface. We offer six lengths: from 2 to 12 connection holes, codes EB 022L to EB 122L, with lengths of 325 to 675 mm. Cable lugs are fixed with M10 or M12 bolts in stainless steel or brass.

Two disconnect links at the two ends of the bar

Two links at the two ends of the bar bring two separate earthing systems to one earth bar, for example the protective earth and the lightning protection system earth, or two separate earth pits.

  • Two disconnect links at the two ends of the bar
  • 50 x 5 copper bar; tinned to order
  • Reinforced polyester insulators
  • Six lengths, from 2 to 12 holes
  • Two earthing systems on one bar

    Each earthing system connects through its own link. During inspection, each is opened and measured separately and the other connections stay untouched.

  • Common point for earth conductors

    The earth conductor, protective conductors and bonding conductors are each fixed to the bar's holes with their own cable lug.

  • Copper or tinned copper

    Bare copper for dry environments and the inside of panels. The tinned version helps reduce oxidation and discolouration of the copper surface in damper or more corrosive environments.

  • 6 standard codes

    Codes EB 022L to EB 122L. Other dimensions are made to order.

  • Made by KALOT Group

    Designed and made to KALOT drawings and technical catalogue. The datasheet for each model is in the documents section.

Technical Product Information

Click to view enlarged

Feature

Value

Type

Earth bar with two disconnect links

Bar

50 x 5 mm copper; tinned copper to order

Base

Stainless steel

Insulator

Reinforced polyester; 2 to 4 depending on bar length

Bolts, nuts and washers

Stainless steel or brass

Number of holes

2, 4, 6, 8, 10 or 12 (according to code)

Cable lug connection bolt

M10 or M12, to order

Codes

EB 022L to EB 122L

Codes and dimensions

Code

Number of holes

⁦L (mm)⁩

⁦W (mm)⁩

⁦H (mm)⁩

⁦EB 022L⁩

⁦2⁩

⁦325⁩

⁦90⁩

⁦90⁩

⁦EB 042L⁩

⁦4⁩

⁦395⁩

⁦90⁩

⁦90⁩

⁦EB 062L⁩

⁦6⁩

⁦465⁩

⁦90⁩

⁦90⁩

⁦EB 082L⁩

⁦8⁩

⁦535⁩

⁦90⁩

⁦90⁩

⁦EB 102L⁩

⁦10⁩

⁦605⁩

⁦90⁩

⁦90⁩

⁦EB 122L⁩

⁦12⁩

⁦675⁩

⁦90⁩

⁦90⁩

Dimensions are in millimetres. Our products are continually improved and some dimensions may be updated, so please confirm final dimensions with our specialists before you buy.

Three-dimensional view of an earth bar installation in a building

See the main earth bar with its disconnecting link, the sub earth bars, the earth pit and the foundation earth, with an exploded view, installation steps, a single-line diagram and a parts list.Open full screen

Frequently Asked Questions

Why two links?

When two separate earthing systems come together on one earth bar, each has its own link so it can be inspected and measured separately.

What is an earth bar used for?

An earth bar is the common connection point for the earth conductor, protective conductors and bonding conductors, and it shares one earthing system output among several loads.

What is a disconnect link for?

To separate the earthing system from the loads during inspection and earth resistance measurement, without opening the connection of each individual load.

How do I choose the right code?

The number of inputs and outputs sets the number of holes you need, and the number of earthing systems to be measured separately sets the number of links.

Bare or tinned copper: which should I choose?

Bare copper is sufficient for dry environments and the inside of panels and electrical rooms. In damper or more corrosive environments, the tinned version helps reduce oxidation and discolouration of the copper surface.

Can a two-link earth bar be used for one earthing system?

Yes. The second link can be reserved for another earth connection added later. But if you have only one earthing system, the one-link earth bar is simpler.

What does the number of insulators depend on?

On the bar length. Shorter models have fewer insulators and longer models have more (2 to 4).

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.