Move your pointer over the image to zoom in
Complete Product Overview
Brass air rod base for roof ridges
Last updated:
Our brass air rod base for roof ridges holds a conventional air rod on the ridge of pitched roofs and connects the tape conductor to it. The two sloping wings of the base rest on either side of the ridge, and the air rod sits in the threaded socket on top, perpendicular to the ridge. It comes in two threads, M16 and M20.
Brass air rod base for roof ridges
Our brass air rod base for roof ridges holds a conventional air rod on the ridge of pitched roofs and connects the tape conductor to it. The two sloping wings of the base rest on either side of the ridge, and the air rod sits in the threaded socket on top, perpendicular to the ridge. It comes in two threads, M16 and M20.
- For the ridge of pitched roofs
- Connects the tape conductor to the air rod
- M16 and M20 threads
- One-piece brass body
Sits on the ridge
The two sloping wings of the base rest on either side of the ridge, and the conventional air rod stands vertically at the highest point of the roof.
Tape conductor connection
The base is made to connect the roof tape conductor to the air rod.
Mounting holes
The drilled arms hold the base firmly on the ridge and the roof substructure.
Cast brass
One-piece brass body that resists atmospheric corrosion.
Technical Product Information
Click to view enlarged
Feature | Value |
|---|---|
Product type | One-piece base for conventional air rods on the roof ridge |
Installation location | Roof ridges and pitched roofs |
Connectable conductor | Tape |
Air rod connection thread | M16 or M20 |
Dimensions | L = 137 and H = 71 mm |
Material | Cast brass |
Codes | ARRS 16 and ARRS 20 |
Dimensions and codes
Code | Thread | L (mm) | H (mm) |
|---|---|---|---|
ARRS 16 | M16 | 137 | 71 |
ARRS 20 | M20 | 137 | 71 |
Our products are continually improved and some dimensions may be updated; please confirm the final dimensions with our specialists before you buy.
Click to view enlarged
Download the drawing: PDF · SVG (vector)
Click to view enlarged
Application
On pitched roofs, the ridge is the highest point and usually the best place for air rods and the roof conductor. This base is made for exactly that spot: its wings rest on the two slopes of the ridge, the conventional air rod stands vertically and the roof tape conductor connects to the base.
Installation steps
- Mark the base positions along the ridge according to the system drawing.
- Place the base on the ridge so that its two wings rest on the two slopes, and fix it to the roof substructure with suitable screws.
- Connect the roof conductor tape to the base according to the system drawing.
- Screw the air rod into the threaded socket and tighten it.
Inspection and maintenance
During periodic inspections of the lightning protection system, check that the screws and the air rod are tight, the air rod is vertical and the conductor connection is sound, and retighten where needed.
The standards below are the reference for designing and selecting lightning protection system components, and they show where this part sits in the system.
System design: IEC 62305-3
Design, installation and inspection of a structure's lightning protection system, including the position and height of air rods, the installation of roof conductors and down conductors, and how they connect to each other.
Connection components: IEC 62561-1
Requirements and tests for the metal connection components of a lightning protection system. Parts that join air rods and conductors fall into this group.
Air rods and conductors: IEC 62561-2
Material, dimension and test requirements for air rods, conductors and earth electrodes.
Brass air rod base for roof ridges
Frequently Asked Questions
Where is this base installed?
On the ridge of pitched roofs. For a flat roof, use the base for flat surfaces, and for mounting on the roof slope itself, use the adjustable stainless steel base.
Which conductor connects to this base?
The roof tape conductor. The system designer sets the conductor route.
What size is the base thread?
ARRS 16 has an M16 thread and ARRS 20 an M20 thread, for conventional air rods of 16 and 20 mm diameter.
Why is the air rod installed on the ridge?
The ridge is the highest point of a pitched roof, so a passive air rod installed there has the greatest effective height and zone of protection.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



