KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original

Other earth electrodes

Alongside the earth rod, other electrodes are used in some conditions to make the connection with the earth. This category covers the copper plate and the earth pipe. The copper plate is installed buried, in contact with the soil or with a resistance-reducing material. The choice between plate, pipe and earth rod is made in the earthing design, based on the soil conditions at the site.

The electrode type, dimensions and installation depth must be set from the soil resistivity and the earth resistance required in the earthing design. The connection between conductor and electrode must also be continuous and resistant to corrosion. For buried connections, exothermic welding is a common choice.

Three-dimensional view of copper earth plate installation

Drag to rotate; scroll to zoom.Open full screen
KALOT Group hot-dip galvanised earth pipe, 3-inch, with a welded connecting tab and two holes
Other earth electrodes

Galvanised and stainless steel earth pipe (pipe electrode for earth pits)

The galvanised earth pipe from KALOT Group is a tubular earth electrode for vertical installation in a deep earth pit, and we offer it in hot-dip galvanised steel and in 304L and 316 stainless steel. The pipe has a nominal size of 3 inches and comes in two lengths, 3 and 6 m. A two-hole tab welded to the outer wall at its top end takes a two-hole copper cable lug. The pipe's large contact area with the soil and its deep installation, together with the column of GIM at the bottom of the pit, create a large electrode in the moist layer of the soil: an answer for land where the top layer is dry and the moisture lies deep. Our installation method is simple and clear. A pit 40 to 60 cm in diameter and at least 6 m deep is dug, and its lower 3 to 4 m is filled with GIM ground improvement material. The 6 m pipe stands upright inside, with its top end just below the floor of the concrete inspection pit or polyethylene inspection pit. Inside the inspection pit, a short bare copper conductor connects the pipe tab to the pit's earth bar, and for this pipe we recommend the tinned copper earth bar. In the second method, the 3 m pipe is lowered to the bottom of the pit on its own conductor, GIM covers the whole pipe and 15 cm above it, and the conductor rises through the pit to the earth bar. We have compared the earth pipe in technical and financial terms with the galvanised earth rod, the copper-bonded earth rod and the copper earth pit plate.