Move your pointer over the image to zoom in
Complete Product Overview
Brass wall support for air rods
Last updated:
Our brass wall support installs a conventional air rod on the wall and facade of a building, wherever fixing a base on the roof is not possible. Two supports on the wall, an upper one to hold the body of the air rod and a lower one for the coupling at its foot, keep the air rod vertical. The tape or round conductor connects to the air rod through the coupling.
Brass wall support for air rods
Our brass wall support installs a conventional air rod on the wall and facade of a building, wherever fixing a base on the roof is not possible. Two supports on the wall, an upper one to hold the body of the air rod and a lower one for the coupling at its foot, keep the air rod vertical. The tape or round conductor connects to the air rod through the coupling.
- Installs the air rod on walls and facades
- For 16 and 20 mm air rods
- Used with a tape or conductor coupling
- Brass body
An alternative to the roof base
When a base cannot be installed on the roof, the conventional air rod is installed on the wall with two supports.
Used with a coupling
The lower support holds the coupling at the foot of the air rod, and the tape or round conductor connects to it.
Drilled arm
The drilled plate of the support is fixed to the wall with screws and wall plugs.
Cast brass
Brass body that resists atmospheric corrosion on the building facade.
Technical Product Information
Click to view enlarged
Feature | Value |
|---|---|
Product type | Wall support for conventional air rods |
Installation location | Building walls and facades |
Companion parts | Coupling for connecting tape to air rod, or coupling for connecting conductor |
Air rod diameter | Ø16 or Ø20 mm |
Dimensions | L = 97 and W = 113 mm |
Material | Cast brass |
Codes | SMAB 16 and SMAB 20 |
Dimensions and codes
Code | Air rod diameter | L (mm) | W (mm) |
|---|---|---|---|
SMAB 16 | Ø16 | 97 | 113 |
SMAB 20 | Ø20 | 97 | 113 |
Our products are continually improved and some dimensions may be updated; please confirm the final dimensions with our specialists before you buy.
Click to view enlarged
Download the drawing: PDF · SVG (vector)
Click to view enlarged
Application
Sometimes the roof is not accessible, its covering does not allow drilling, or the conventional air rod needs to sit beside the facade and the building edge. In these cases the air rod is installed on the facade with a wall support, and we use the coupling for connecting tape to air rod or the coupling for connecting conductor to make the conductor connection.
Installation steps
- Mark the air rod position on the facade. The two supports must sit exactly on one vertical line.
- Fix the lower and upper supports with screws and wall plugs that suit the wall material.
- Place the coupling in the eye of the lower support, pass the air rod through the eye of the upper support and screw it into the coupling.
- Connect the down conductor to the coupling and tighten its bolts.
Inspection and maintenance
During periodic inspections of the lightning protection system, check that the screws and locknut are tight, the air rod is vertical and the conductor connection is sound, and retighten where needed.
The standards below are the reference for designing and selecting lightning protection system components, and they show where this part sits in the system.
System design: IEC 62305-3
Design, installation and inspection of a structure's lightning protection system, including the position and height of air rods, the installation of roof conductors and down conductors, and how they connect to each other.
Connection components: IEC 62561-1
Requirements and tests for the metal connection components of a lightning protection system. Parts that join air rods and conductors fall into this group.
Air rods and conductors: IEC 62561-2
Material, dimension and test requirements for air rods, conductors and earth electrodes.
Brass wall support with tape coupling
Frequently Asked Questions
When is the wall support used?
When an air rod base cannot be installed on the roof, or when the air rod needs to sit beside the facade.
How many supports does each air rod need?
Two supports: an upper one to hold the body of the air rod and a lower one to hold the coupling at its foot.
How does the conductor connect to the air rod?
With a coupling: the coupling for connecting tape to air rod for a tape conductor and the coupling for connecting conductor for a round conductor.
Which air rod diameters does it suit?
SMAB 16 is for a 16 mm air rod and SMAB 20 for a 20 mm diameter.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



