Move your pointer over the image to zoom in
Complete Product Overview
Four-way conductor-to-conductor clamp
Order Code: SCCX 050 · SCCX 070 · SCCX 095
Last updated:
The KALOT four-way conductor-to-conductor clamp (Square Cable Clamp) joins two stranded copper conductors firmly and reliably at a single point, in a four-way, straight or three-way arrangement.
The clamp is made from two high-quality brass parts, each with a conductor channel, and the channels sit at right angles to each other. The conductors lie in the channels and four stainless steel bolts press the two parts onto them.
We make this clamp in three models: SCCX 050 for 50 mm², SCCX 070 for 70 mm² and SCCX 095 for 95 mm² conductors. The KALOT ABHAR brand is engraved on the upper part.
One clamp for crossings, branches and continuing conductor runs
On roof mesh networks, down conductors and earth rings, every point where two conductors meet needs a reliable joint. The KALOT four-way conductor-to-conductor clamp makes that joint with a brass body and four stainless steel bolts: firm, easy to inspect and long-lasting. This clamp is not suitable for joints buried in soil. For those, use KALweld® exothermic welding from KALOT Group.
Brass body, stainless steel bolts
Brass belongs to the same family as copper conductors and stainless steel bolts do not corrode over time, so the electrical connection stays stable for years.
Four bolts, even pressure
Four bolts at the four corners press the two pieces evenly onto the conductors, so the joint does not loosen under wind and vibration.
Technical Product Information
Feature | Value |
|---|---|
Product type | Four-way conductor-to-conductor clamp (Square Cable Clamp) |
Application | Four-way, straight and three-way joints of stranded copper conductors in lightning protection and earthing systems |
Conductor | SCCX 050: 50; SCCX 070: 70; SCCX 095: 95 mm²; stranded copper |
Body material | Brass |
Bolts | 4 pieces, stainless steel, hexagon head |
Structure | Two pieces, each with one conductor channel; channels at right angles; threaded holes in the lower piece |
Dimensions | SCCX 050: 50 × 50 × 30 mm; SCCX 070: 53 × 53 × 33 mm; SCCX 095: 55 × 55 × 35 mm |
Marking | KALOT ABHAR brand on the upper part |
Order code | SCCX 050 , SCCX 070 , SCCX 095 |
Our products are continually improved and some dimensions may be updated; please confirm the final dimensions with our specialists before you buy.
Order code | Conductor (mm²) | L (mm) | W (mm) | H (mm) |
|---|---|---|---|---|
SCCX 050 | 50 | 50 | 50 | 30 |
SCCX 070 | 70 | 53 | 53 | 33 |
SCCX 095 | 95 | 55 | 55 | 35 |
Choose the model by the cross-section of the conductor on your route. For large orders or help choosing the right clamp for your project, our experts at KALOT Group will gladly guide you.
Click to view enlarged
The KALOT dimensional drawing shows the top piece with its conductor channel, the KALOT ABHAR marking and four bolts, the lower piece with its perpendicular channel and four threaded holes, and a side view with two crossing conductors between the pieces. SCCX 050: 50 × 50 × 30 mm; SCCX 070: 53 × 53 × 33 mm; SCCX 095: 55 × 55 × 35 mm. The PDF and SVG files are in the "Documents and downloads" section of this page.
Click to view enlarged
The clamp from different angles: the top piece with KALOT ABHAR on the conductor channel, the lower piece with its perpendicular channel, and the four stainless steel bolts that hold the two pieces together.
Click to view enlarged
Three connection layouts
- Four-way (crossing): both conductors run through the clamp; suited to the nodes of a roof mesh network.
- Straight: two conductor ends meet in one channel and the route continues.
- Three-way (T): one conductor runs through the clamp and the other joins it in the perpendicular channel; suited to branching a down conductor from the roof network.
Installation sequence
- Choose the clamp model by the conductor cross-section.
- Clean the conductor surfaces at the joint.
- Place the first conductor in the channel of the lower piece and the second in the channel of the top piece.
- Put the two pieces together and fit the four stainless steel bolts.
- Tighten the bolts gradually in a crosswise pattern so the pressure on both conductors is even.
- Finally, check that the joint is firm and that the conductors sit fully in the channels.
Choosing the right clamp
- Conductor to conductor, four-way/straight/three-way, 50 to 95 mm² conductors: this clamp, SCCX 050 / SCCX 070 / SCCX 095.
- Three-way conductor-to-conductor branch: three-way conductor-to-conductor clamp.
- Four-way conductor-to-tape joint: four-way conductor-to-tape clamp.
- Joining conductor and tape with one stainless steel clamp: multi-purpose stainless steel four-way clamp.
Click to view enlarged
An example of a copper conductor mesh installed on a roof: at each crossing of the network, one KALOT four-way conductor-to-conductor clamp joins the conductors.
The system designer sets the mesh dimensions according to the protection level. In IEC 62305-3, the largest permitted mesh sizes for protection levels I to IV are 5×5, 10×10, 15×15 and 20×20 metres respectively.
The following standards set out the requirements for connection components and the design of conductor networks:
IEC 62561-1 (connection components)
This standard sets the requirements and tests for connection components in lightning protection systems, including conductor-to-conductor clamps, covering mechanical strength, electrical behaviour and durability against corrosion.
IEC 62305-3 (system design and installation)
This standard covers the mesh dimensions of roof networks, the routing of down conductors, and how they connect to each other and to the earthing system.
Cross clamps for wire and tape
Documents & Downloads
Frequently Asked Questions
What is a four-way conductor-to-conductor clamp used for?
This clamp joins two stranded copper conductors in a four-way, straight or three-way layout, on roof mesh networks, down conductors and earthing networks.
Which model should I choose?
SCCX 050 for 50 mm² conductors, SCCX 070 for 70 mm² conductors and SCCX 095 for 95 mm² conductors.
What are the clamp and bolts made of?
The clamp body is brass and its four bolts are stainless steel.
Why are the bolts stainless steel?
Stainless steel bolts do not corrode outdoors, so their pressure on the conductors holds and the electrical connection stays stable over time.
Can one clamp make a three-way joint?
Yes. One conductor runs through the clamp and the other joins it in the perpendicular channel.
How should I tighten the bolts?
Tighten the bolts gradually in a crosswise pattern, so the two pieces press evenly onto both conductors.
Is this clamp suitable for tape as well?
This clamp is made for round stranded conductors. To connect a conductor to a tape, use the KALOT four-way conductor-to-tape clamp.
Is the clamp suitable for a roof mesh network?
Yes. At each crossing of a conductor mesh, one four-way clamp joins the two conductors.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



