KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original

industrial hall lightning protection and factory earthing

In a factory, stopping a production line because a PLC card or drive burnt out often costs more than the part itself. Most surges that knock out automation come from inside the plant and from the power network, and lightning is only one of their sources. We have worked alongside clients in more than 100 manufacturing plants, from pharmaceuticals and tiles to textiles, automotive and food. Let us take a tour of the factory together.

A walk through the plant

1Industrial shed roofFire

The problem

If thin metal roof sheeting is counted as a natural air termination, it can be punctured or overheat where the strike lands. In one report from a furniture factory, lightning entered the power circuits of 12 paint booths through the aluminium roof and three booths caught fire.

Our answer:
Lightning risk assessment, air terminals kept clear of the roof sheeting, down conductors, a ring earth electrode and bonding of the structure.

3Production line: PLC, drives and sensorsLine stoppage

The problem

Sensors, photo eyes and fieldbus cables are the back door through which surges reach the PLC. In one report from a food plant, repeated PLC failures almost disappeared once the switchboards and power supply were corrected.

Our answer:
Data line surge protective devices (SPDs) on PLC inputs and outputs, plus a meshed bonding network.

4Powder and solvent storeExplosion

The problem

When powder or solvent is poured, any metal part isolated from earth builds up static charge. In one well-known incident, the likely cause was a level float inside the tank that was not properly bonded. Bonding the hose alone is therefore not enough.

Our answer:
Bonding review, an earthing point at the filling station and a recorded continuity test.

5Hazardous areasExplosion

The problem

In a hazardous area, a bonding connection must not spark or overheat when lightning current passes through it. A bolt loosened by vibration does exactly that.

Our answer:
KALweld® exothermic welding, equipotential bonding design and inspections at shorter intervals.

6Electronics assembly hall and cleanroomHidden damage

The problem

A static discharge too small to feel can weaken an electronic component, and the failure shows up later in the customer's hands. In pharmaceutical plants, stainless steel equipment and the handling of powders and solvents also need bonding.

Our answer:
ESD earthing points connected to the plant earthing system, with periodic testing.

7Earth pits and the labour inspector's visitFines and closure

The problem

The labour inspector checks the workplace against the safety regulations and notifies the employer in writing of any imminent hazard. An earth pit that has gone untested for years is the first weak point in the file.

References: IEC 62305-2 to 4, IEC 61643, IEC/TS 60079-32-1, NFPA 77, IEC 60079-14, IEC 61340-5-1, FM Global DS 5-11

A file ready for inspection

What your plant file holds after our work:

  • Measured resistance of every earth pit
  • Bonding continuity tests for structures and panels
  • List of surge protective devices and their indicator status
  • Lightning risk assessment report
  • Earthing system and lightning protection drawing
  • Bonding records for powder, solvent and explosion-proof areas
  • Date of the next test
  • Safety approval certificate to present to the inspector

Some of our projects

Pharmaceutical and chemical: Zahravi Pharmaceutical, Sterile Pharmaceutical, Rooz Darou, Sari Antibiotic Production, Farayand Shimi Zangan, Farayand Shimi Hakim, Pars Zomorrod Potassium Permanganate, Shafaf Shimi Plast

Tiles, ceramics and building materials: Almas Kavir Ceramic, Berelian Rafsanjan Tile, Noori Tazeh Porcelain, Tabriz Gypsum, Qazvin Silica Processing, Qazvin Super Panel, Sofal Sazan Kerman

Automotive and machine building: Iran Khodro Fars, Iran Khodro Engine, Iran and Tabriz Tractor Manufacturing, Arak and Dezful Machine Building, TUGA steam turbines, Niroo Moharekeh, Iran Relay Industries

Textiles, food and packaging: Helal Iran Textile, Malayer Fibre, Iran Starch and Glucose, Dehloran flour silo, a 4100-tonne cold store in Chabahar, an industrial poultry slaughterhouse, Zarrinban Packaging

What to send for design and a quotation

Layout of the sheds and roof types, single-line diagram, a list of panels and automation lines, the classification of powder, solvent and explosion-proof areas, and the latest labour inspection report.

Frequently Asked Questions

Does the metal roof of an industrial shed count as lightning protection in itself?

Only if the sheet is thick enough and puncturing or heating at the strike point is acceptable. Otherwise a separate lightning protection system is needed.

Why does a PLC burn out even though the panel has an SPD?

Because surges also come in through sensor and network cables. PLC inputs and outputs need data SPDs too.

What documents are needed for a Ministry of Labour inspection?

The earthing system test report, the status of lightning protection and bonding, and the electrical safety documents. Our specialists prepare the exact list to suit your site.

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.