KALOT Group
This translation is an AI-assisted draft pending human review. It is not indexed for search yet.Read the reviewed Persian original

Lightning Risk Assessment

At KALOT Group we carry out lightning risk assessments to IEC 62305-2, taking into account the structure, how it is used, the environment and any existing protection. The assessment shows whether protection is needed and which measures bring the risk down to a tolerable level. That result then becomes the technical basis of the design.

Lightning risk assessment is carried out after the field visit and a review of the project drawings and data.

KALOT Group is the official and exclusive representative of Franklin France in Iran, and we also run these calculations with the company's ProtecRisk software.

Scope of our lightning risk assessment services

Figure 1. Lightning risk assessment process, from data on the structure and connected lines to comparison with the tolerable limit and selection of protection measures.
  • Reviewing the data and setting the basis of assessment: we review the location and characteristics of the structure, its use, how people are present, the connected power and telecom lines, lightning data and the protection measures already in place. We also set the assumptions and the edition of the standard on which the calculations are based.
  • Identifying sources and consequences of damage: we examine lightning strikes to the structure or its connected lines and strikes near them. We identify the possible consequences, including injury to people, physical damage and failure of electrical and electronic systems.
  • Risk calculation and analysis: we calculate the risk components and determine the share of each contributing factor. The results are then compared with tolerable values to show whether protection measures are needed.
  • Assessing damage to internal systems: we examine the effects of lightning on electrical and electronic systems and the related availability criteria, in line with the edition of the reference standard and the project requirements.
  • Selecting and comparing protection measures: we assess the effectiveness of external protection, equipotential bonding, overvoltage protection and other related measures, and compare protection scenarios with one another. Where needed, we also determine the lightning protection level (LPL).
  • Documenting and reviewing the results: the report covers the input data, assumptions, the edition of the reference standard, acceptance criteria and the calculation results before and after the proposed measures. If software is used, its name and version are stated in the report. When the use changes, the site is extended or the protection systems are modified, the risk assessment is reviewed and updated.
Figure 2. Sources of damage S1 to S4 and types of damage D1 (injury to people), D2 (physical damage) and D3 (failure of internal systems).
Figure 3. Comparison of protection measures: a lightning protection system reduces the risk of casualties and loss, while bonding and surge protective devices (SPDs) reduce damage to internal systems (values are illustrative).

Related articles and services

The outcome of the risk assessment feeds directly into lightning protection system design and consultancy. To learn about the latest changes to the standard, read our article IEC 62305:2026 package published.

Press the “Request a Technical Consultation” button and our engineers will contact you to discuss your project.

Have a Technical Question?

KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.