Whatever the type of ground, we always recommend using standard ground improvement materials. But if the earth electrode (pit, earth rod, mesh and so on) is to be built in wet ground, moisture-absorbing materials (clay-based materials such as mineral soils) have their place. This does not mean that carbon-based materials have no use in this ground; on the contrary, their resistance to corrosion of the earthing system is very valuable, especially in wet areas.

In dry or high-altitude areas, on the other hand, moisture-absorbing materials perform very poorly, because they eventually lose their moisture. Being absorbent may delay this a little, but the loss of moisture is unavoidable and the system's resistance then rises. In these conditions, carbon-based materials are widely used: carbon is conductive in itself, so a lack of moisture does not impair its performance and the electrode (pit) keeps its low resistance.