Surge Protection (SPD)
Sometimes a very brief disturbance on the power network is enough to knock out a sensitive device, destroy data or halt part of an industrial process. Transient overvoltages can be caused by lightning, switching operations, the connection and disconnection of large loads or network disturbances, and in a very short time they can create stress beyond what the equipment insulation can withstand.
Transient overvoltage protection equipment, known as SPDs and surge arresters, limits the voltage level and carries the surge current along a controlled path, reducing the likelihood of damage to electrical and electronic equipment. These devices can protect everything from switchboards and control systems to telecommunications networks, data centres, industrial facilities, solar systems and sensitive building equipment. However, they do not replace earthing, bonding or a lightning protection system, and should be selected as a coordinated part of a comprehensive protection plan.
Effective protection takes more than installing one surge protective device at the panel inlet. The network type, rated voltage, origin and severity of the surge, voltage protection level, discharge capacity, SPD type, installation location, length of the connecting conductors, backup protection and coordination between stages must all be considered in selecting and coordinating SPDs. Correct installation, a short and suitable connection to the bonding and earthing network, and inspection and maintenance of surge protective devices are decisive in keeping these devices reliable.
In this section, drawing on more than fifty years of engineering and project experience, we at KALOT share practical guidance on the origins of transient overvoltages, the types of protection equipment, and the principles of selecting, designing, installing, coordinating, testing and maintaining SPDs: knowledge that helps reduce unplanned downtime, increase equipment reliability and support more accurate technical decisions.
