Tape-to-tape exothermic weldingTT7 exothermic weld: overlap joint of two copper tapes
The TT7 exothermic weld makes an overlap joint of two copper tapes in earthing, bonding and lightning protection networks. We manufacture its graphite mould under our KALweld® brand and supply it complete with weld powder and handle. Once welded, the joint becomes one piece with the conductors, with no nuts and bolts to loosen over time. KALweld® welds have been tested to IEEE 837 and UL 467 at the Power and Water University of Technology (Shahid Abbaspour) and successfully passed the freeze, thermal cycling and short-circuit tests. In an overlap joint, the ends of the two tapes lie one on top of the other instead of meeting edge to edge, and the weld fully encloses the overlapping section. The TT7 mould is made for 20×3 to 60×5 mm tape. The mould and powder code for each size is in the "Mould and powder selection" table, and the HC 01 handle suits all its sizes.