Move your pointer over the image to zoom in
Complete Product Overview
Arched clamp for mounting ESE air terminal masts
Last updated:
The KALOT arched clamp is one of the simplest and most reliable ways to fix an ESE air terminal mast to the pipe support at the installation site.
Each clamp is made of two galvanised steel sheet jaws with a pipe recess and two double-ended threaded studs with nuts and washers: one jaw grips the air terminal mast, the other grips the support pipe, and the studs tighten the two pipes firmly side by side.
At least two arched clamps are usually installed, 30 to 70 cm apart depending on the length of the support. Made by KALOT Group.
The air terminal mast, held firmly on a pipe support
An ESE air terminal is installed on a tall mast, and that mast must stay completely steady against wind and vibration. The arched clamp fixes the mast to the support pipe at the site, with no welding and no drilling on the mast.
For any support pipe
The arched clamp is used on pipe supports of various sizes.
Galvanised steel
The galvanised jaws and bolts are protected against corrosion outdoors and on roofs.
Two clamps or more
At least two clamps, set 30 to 70 cm apart, hold the mast at two points.
Made by KALOT Group
A simple, sturdy clamp that matches telescopic ESE air terminal masts.
Technical Product Information
Feature | Value |
|---|---|
Product type | Arched clamp for mounting ESE air terminal masts |
Application | Fixing the (telescopic) ESE air terminal mast to the pipe support at the installation site |
Material | Steel with a galvanised coating |
Structure | Two steel sheet jaws with a pipe recess, two double-ended threaded studs, nuts and washers |
Quantity per mast | At least two clamps |
Clamp spacing | 30 to 70 cm, depending on the length of the support |
Manufacturer | KALOT Group |
Click to view enlarged
KALOT drawing: two arched clamps fix the air terminal mast to the support pipe (right); clamp components: two jaws, two double-ended threaded studs, nuts and washers, with dimensions L, L1, H, D and thread (left). PDF and SVG files are in the "Documents and downloads" section of this page.
Installation sequence
- Place the air terminal mast next to the support pipe and set the final height.
- Place the jaws of the first clamp on either side of the mast and pipe, and pass the double-ended threaded studs through the holes in the jaws.
- Install the second clamp 30 to 70 cm from the first.
- Tighten the nuts with washers gradually and evenly until the mast is completely secure.
- Check that the mast is plumb and that all nuts are tight.
Related products
- Air terminal mast: galvanised telescopic mast for ESE air terminals.
- Design and installation to NF C 17-102: Franklin France ESE air terminals.
Installing an ESE air terminal on a telescopic mast
Documents & Downloads
Frequently Asked Questions
What is the arched clamp used for?
It fixes the ESE air terminal mast to the pipe support at the installation site.
How many arched clamps does each mast need?
At least two clamps, set 30 to 70 cm apart depending on the length of the support.
What is the arched clamp made of?
Steel with a galvanised coating, for the jaws, bolts, nuts and washers.
Does installing the arched clamp require welding?
No. The clamp is tightened with bolts and nuts and holds the mast and the pipe side by side without any welding.
Who manufactures the arched clamp?
KALOT Group.
Have a Technical Question?
KALOT Group's technical experts are ready to answer your questions about lightning rods and earthing systems.



