Tape-to-earth rod exothermic weldingTE1 exothermic weld: copper tape end to the top of an earth rod
The TE1 exothermic weld connects a copper tape end to the top of an earth rod in earthing, bonding and lightning protection networks. We manufacture its graphite mould under our KALweld® brand and supply it complete with weld powder and handle. Once welded, the joint becomes one piece with the conductors, with no nuts and bolts to loosen over time. KALweld® welds have been tested to IEEE 837 and UL 467 at the Power and Water University of Technology (Shahid Abbaspour) and successfully passed the freeze, thermal cycling and short-circuit tests. The TE1 mould is made for 14.2 and 17.2 mm earth rods and 20×3 to 50×5 mm tape. The mould and powder code for each size is in the "Mould and powder selection" table, and the HC 01 handle suits all its sizes.