Conductor-to-steel plate exothermic weldingCS2 exothermic weld: through-run copper conductor to a horizontal steel plate
The CS2 exothermic weld connects a through-run copper conductor to a horizontal steel plate in earthing, bonding and lightning protection networks. We manufacture its graphite mould under our KALweld® brand and supply it complete with weld powder and handle. Once welded, the joint becomes one piece with the conductors, with no nuts and bolts to loosen over time. KALweld® welds have been tested to IEEE 837 and UL 467 at the Power and Water University of Technology (Shahid Abbaspour) and successfully passed the freeze, thermal cycling and short-circuit tests. CS2 is the heavier version of this joint, with a larger weld body, and it suits connections that call for a bulkier weld. For smaller conductors and thinner steel plates, choose the lighter mould, the CS9 exothermic weld. The CS2 mould is made for 16 to 300 mm² conductors. The mould and powder code for each size is in the "Mould and powder selection" table, and the HC 01 handle suits all its sizes.