Conductor-to-tape exothermic weldingCT1 exothermic weld: bare copper conductor to the end of a copper tape
The CT1 exothermic weld joins a bare copper conductor to the end of a copper tape for earthing networks, bonding and lightning protection. We produce its graphite mould under the KALweld® brand and offer it with weld powder and a handle. Once welded, the joint is one piece with the conductors, with no nuts or bolts to work loose over time. KALweld® welds have been tested to IEEE 837 and UL 467 at the Power and Water University of Technology (Shahid Abbaspour) and have passed the freezing, thermal cycling and short-circuit tests. The CT1 mould is made for 16 to 240 mm² conductors and 20×3 to 60×5 mm tapes. The mould and powder code for each size is in the "Mould and powder selection" table, and the HC 01 handle fits all its sizes.