Conductor-to-reinforcing bar exothermic weldingCR1 exothermic weld: copper conductor end onto a horizontal reinforcing bar
The CR1 exothermic weld joins a copper conductor end onto a horizontal reinforcing bar for earthing networks, bonding and lightning protection. We produce its graphite mould under the KALweld® brand and offer it with weld powder and a handle. Once welded, the joint is one piece with the conductors, with no nuts or bolts to work loose over time. KALweld® welds have been tested to IEEE 837 and UL 467 at the Power and Water University of Technology (Shahid Abbaspour) and have passed the freezing, thermal cycling and short-circuit tests. The CR1 mould is made for 16 to 300 mm² conductors. The mould and powder code for each size is in the "Mould and powder selection" table, and the HC 01 handle fits all its sizes.