Certificates and Approvals
Conformity certificates and test reports from accredited laboratories in Iran and abroad for KALOT Group products.
2 of 43 documents in this section
Laboratory test report for the KALweld® conductor-to-conductor T exothermic weld | Power and Water University of Technology
Report no. 95/4220 from the Power and Water University of Technology (Shahid Abbaspour), Ministry of Energy, dated 1395/12/24, prepared at the request of KALOT Group to IEEE 837 and UL 467: freeze cycle (10 cycles), thermal cycle (25 cycles, largest change in weld resistance 3.0%) and 20 kA short-circuit tests on a conductor-to-conductor T weld (CC2) made with KALweld® weld powder and 120 mm² copper conductor. Result of all tests: approved.
Laboratory test report for KALweld® four-way conductor-to-conductor exothermic weld | Power and Water University of Technology
Report no. 95/4221 from the Power and Water University of Technology (Shahid Abbaspour), Ministry of Energy, dated 1395/12/24, prepared at the request of KALOT Group to IEEE 837 and UL 467: freeze cycle tests (10 cycles), thermal cycle tests (25 cycles, largest change in weld resistance 2.8%) and a 20 kA short circuit test on a four-way conductor-to-conductor weld (CC4) using KALweld® weld powder and 120 mm² copper conductor. Result of all tests: approved.
